- 194 -
B A S I C
O F F
(25) BASIC setting display
[POWER]
(26) Press the [POWER] key.
F I L E M A I N T E N A N C E
(27) BASIC file browser setting
[POWER]
(28) Press the [POWER] key.
0 0 - - - - - - -
(29) The name of the file stored is displayed.
[POWER]
(30) Press the [POWER] key.
B A S I C T R A C E
(31) BASIC trace setting
[POWER]
(32) Press the [POWER] key.
T R A C E
O F F
(33) BASIC trace setting display
(Mode setting)
[POWER]
(34) Press the [POWER] key.
E X P A N D M O D E
(35) BASIC expansion mode
[POWER]
(36) Press the [POWER] key.
< 9 >
B A S I C
S E T T I N G
(37) System mode menu display (BASIC setting)
[POWER]
(38) Hold down the [POWER] key for 3 seconds or
more.
< 0 > S H U T D O W N
(39) System mode menu display (Shutdown)
[POWER]
(40) Press the [POWER] key.
* The setting is updated at shutdown.
NOTE: When the BASIC setting is ON, the issue mode automatically changes to TPCL mode, and
afterwards, the issue mode does not change even when the BASIC setting is set to OFF.
To select other mode, change the mode following the Mode setting procedure.
To Next Page
Loading...
