- 25 -
N O W P R I N T I N G . . .
(22) Start of printing the remaining receive buffer
data
P R I N T A L L
(23) Print method setting (print all) display
[FEED]
(24) Press the [FEED] key.
< 5 > D U M P M O D E
(25) After printing is completed, the display returns
to the receive buffer dumping menu.
[POWER]
(26) Hold down the [POWER] key for 3 seconds or
more.
< 1 > R E S E T
(27) The reset menu is displayed.
[POWER]
(28) Press the [POWER] key.
O N L I N E
(29) The printer returns to the same state as when
the power is turned off and on again.
NOTE: If an error occurs when the printer is printing the data dumped from the receive buffer, the
printer displays an error message, then stops. The error is cleared by pressing the [PAUSE]
key, and the display returns to the receive buffer dumping menu “<5> DUMP MODE”.
After recovering from the error, the printer does not automatically resume printing.
To Next Page
Loading...
