4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
4-74
3. Fasten the lower part of the Earth Plate to the Platen Holder Frame with the screw securing the Platen
Holder Frame.
4. Secure the Antenna Ass’y to the Earth Plate with the SMW-3x6 screw.
4.11.4 Attaching the RFID Module to the RFID Plate
1. Put the Nylon Washer onto the SMW-2ｘ10 Screw. Do the same to the other SMW-2x10 Screw.
To Next Page
Loading...
