Toshiba B-EX4 SERIES - Page 93

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
4-75
2. Place the RFID Module on the RFID Plate as shown in the picture below. Place the two Spacers
(short) under the RFID Module, and secure them to the RFID Plate with the two SMW-2ｘ10 Screws.
4.11.5 Attaching the RFID Module
1. Fit the Bush into the hole as shown in the picture below.
SMW-2x10
Screw
Spacer
(short)
RFID Module
Nylon Washer
RFID Plate
SMW-2x10 Screw
Nylon Washer
Spacer (short)
Bush
When viewed from the printer front side.