Trio Motion Coordinator MC206 User Manual

Motion Coordinator Technical Reference Manual
Trio BASIC Commands 8-85
System Parameters and Commands
COMMSTYPE
Type:
Slot Parameter
Syntax:
COMMSTYPE SLOT(slot#)
Description:
This parameter returns the type of communications daughter board in a controller
slot. On the MC206, a communications daughter board will respond with its type if
the COMMSTYPE is requested from slot(0).
See Appendix 1 for complete list of values returned by communications boards.
COMPILE
Type:
System Command
Description:
Forces compilation (to intermediate code) of the currently selected program. Pro-
gram compilation is performed automatically by the system software prior to pro-
gram
RUN or when another program is SELECT ed. This command is not therefore
normally required.
CONTROL
Type:
System Parameter (Read Only)
Description:
The Control parameter returns the type of Motion Coordinator in the system:
Note:
When the Motion Coordinator is LOCKED, 1000 is added to the above num-
bers. eg a locked MC206 will return 1206.
Controller
CONTROL
MC202: 202
Euro205 205
Euro205X 255
MC206 206
PCI208 208
MC216: 216
MC224: 224

Trio Motion Coordinator MC206 Specifications

General

Brand	Trio
Model	Motion Coordinator MC206
Category	Controller
Language	English