8-46 Trio BASIC Commands
Input / Output Commands
Trio Motion Technology
AIN0..7 / AINBI0..7
Type:
System Parameter
Description:
These system parameters duplicate the AIN() command.
They provide the value of the analog input channels in system parameter format to
allow the
SCOPE
function (Which can only store parameters) to read the analog
inputs.
The value returned is a decimal representation of the voltage input and is in the
range 0 to 4095 corresponding to voltage inputs in the range 0V to 4.096V. With the
alternative forms AINBI0..AINBI3 The value returned is a decimal representation of
the voltage input and is in the range -2048 to 2047 corresponding to voltage inputs
in the range -2.048V to 2.047V.
CURSOR
Type:
Command
Description:
The
CURSOR
command is used in a print statement to position the cursor on the Trio
membrane keypad and mini-membrane keypad.
CURSOR(0), CURSOR(20), CUR-
SOR(40),CURSOR(60)
are the start of the 4 lines of the 4 line display.
CURSOR(0)
and CURSOR(20)
are the start of the 2 line display.
Example:
PRINT#3,CURSOR(60);">Bottom line";
012345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 45 47 48 49 50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
4 Line Display as featured on the Membrane Keypad
To Next Page
Loading...
Need help?
General
