Trio Motion Coordinator MC206 User Manual

8-108Trio BASIC Commands
System Parameters and Commands
Trio Motion Technology
NETSTAT
Type:
System Parameter
Description:
This parameter stores the network error status since the parameter was last cleared
by writing to it. The error types reported are:
NEW
Type:
System Command
Description
Deletes all the program lines in the controller memory. It also may be used to
delete the current
TABLE entries.
Note:
NIO
Type:
System Parameter (Read Only)
Description:
This parameter returns the number of inputs/outputs fitted to the system, or con-
nected on the IO expansion CAN bus.
Bit Set Error Type Value
0TX Timeout 1
1 TX Buffer Error 2
2
RX CRC Error 4
3RX Frame Error 8
NEW
Deletes the currently selected program
NEW progname
Deletes a particular program
NEW ALL
Deletes all programs in memory
NEW "TABLE"
Delete TABLE (In this case ONLY the program name “TABLE”
must be in quotes)

Trio Motion Coordinator MC206 Specifications

General

Brand	Trio
Model	Motion Coordinator MC206
Category	Controller
Language	English