Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
2
3.6 Universal Standard I/Os 23
3.7 IO-Link Master Channels 23
3.8 Configuration Memory 23
3.8.1 Storing a Configuration 23
3.8.2 Loading a Configuration from the Memory Chip 24
3.8.3 Reset the Device to Factory Settings (incl. Deleting the Memory Chip) 24
3.8.4 Deleting the Memory Chip 25
3.8.5 Module Behavior and Configuration Transfer 26
4 Mounting 27
4.1 Mounting Material 27
4.2 Mounting the Device 27
4.3 Grounding the Device 28
4.3.1 Grounding the Device (FE) 29
5 Connecting 31
5.1 Connecting the M12 Connectors 31
5.1.1 Assuring Protection Class (IP67/IP69K) 31
5.2 Connecting the Devices to Ethernet 32
5.3 Connecting the Power Supply 33
5.3.1 24 V supply (PELV) 34
5.4 Connecting Sensors and Actuators 35
5.4.1 Switching Examples 36
6 Setting IP Addresses 37
6.1 Address setting via Rotary Coding Switches 38
6.2 State of Delivery 39
6.3 Setting the IP Address via the Web Server 40
6.3.1 Setting the IP Address for the Safety Side (last Byte) 41
6.4 Address Modes 41
6.4.1 Mode: BootP (300) 41
6.4.2 Mode: DHCP (400) 41
6.4.3 Mode: PGM (500) 42
6.4.4 Mode: PGM-DHCP (600) 42
6.4.5 Resetting the IP Address (Safety Side), Switch Position "000" 42
To Next Page
Loading...
Need help?
General
