103
2018/02
TBPN-L1-FDIO1-2IOL- Safe I/O
10 Restarting after device exchange or modification
10.1 Changing a TBIP-L…-FDIO1-2IOL
10.1.1 Prerequisites
The replacement device has to be an identical device with the identical or a higher device version.
Ensure, that the parameterization and the configuration of the exchange devices exactly corre-
sponds to the parameterization and the configuration of the device to be changed.
Please follow the description under chapter 3.8.5, Module Behavior and Configuration Transfer
to transfer an existing configuration from the configuration memory of the original device into the
exchange device.
10.1.2 Dismounting the Device
Dismount the TBIP-L…-FDIO1-2IOL as described in chapter 11, Maintenance, repair, decommis-
sioning and disposal.
10.1.3 Mounting the Exchange Device
Mount the exchange device as described in chapter 4, Mounting.
10.1.4 Putting the Exchange Device into Operation
Put the exchange device into operation as described in chapter 7.1, Initial Commissioning.
ACHTUNG!
Mounting/dismounting under voltage
Personal damage due to unintentional machine start
Mount or unmount the device only in a de-energized condition
To Next Page
Loading...
Need help?
General
