EasyManua.ls Logo

turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL - Safety Outputs (FDO)

turck TBIP-L...-FDIO1-2IOL Series
TBIP-L4-FDIO1-2IOL
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Product description
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
22
3.5.4 Safety outputs (FDO)
The two safe SIL3 outputs can be used PP- or PM-switching.
Max. 2 × 2-channel safety output (outputs are supplied via V1)
Error detection/diagnostics:
Internal:
Device self test: Diagnosis if an output can not change to the safe state due to an internal error.
External:
Overload diagnosis
Cross connection diagnosis
Short-circuit diagnosis
Parameters
Safe output PP-switching:
Safe output, the load is connected between P-terminal and Ground-terminal.
Safe output PM-switching:
Safe output, the load is connected between P-terminal and M-terminal (mass), necessary for spe-
cial loads which need a separation from Ground.

Table of Contents

Related product manuals