About this user manual
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
6
1.3 Additional Documents
The following additional documents are available online at www.turck.com:
Data sheet
Quick Start guide
Drawings
Dimensional drawings (CAD-data)
EC declaration of conformity
1.4 Explanation of Symbols Used
The following symbols are used in these instructions:
DANGER!
DANGER indicates an immediately dangerous situation, with high risk, the death or severe
injury, if not avoided.
WARNING!
WARNING indicates a potentially dangerous situation with medium risk, the death or
severe injury, if not avoided.
ATTENTION!
ATTENTION indicates a situation that may lead to
property damage, if it is not avoided.
NOTE
In NOTES you find tips, recommendations and important information. The notes facilitate
work, provide more information on specific actions and help to avoid overtime by not fol-
lowing the correct procedure.
CALL TO ACTION
This symbol identifies steps that the user has to perform.
RESULTS OF ACTION
This symbol identifies relevant results of steps.
To Next Page
Loading...
Need help?
General
