37
2018/02
TBPN-L1-FDIO1-2IOL- Safe I/O
6 Setting IP Addresses
The TBIP-Lx-FDIO1-2IOL has two IP addresses. The first IP address addresses the safety side (left side)
of the device. The second IP address addresses the non-safety (right side) of the device.
Both IP addresses have to be addresses of
the same network.
The first 3 bytes of the IP address f
or the safety side (Main IP Address) can be adapted to the network
environment via the device's web server. The last byte of the IP address for the device's safety side
can only be set via the rotary coding switches at the device.
The IP address for the non-safety side (Secondary IP Address)
can be set via the device's web server,
a BootP/DHCP server in the network or via the device DTM.
1. IP address (Main IP Address):
safety side
2. IP address (Secondary IP Address):
non-safety side
Settable via
rotary coding switches
only the last byte:
xxx.xxx.xx.
yyy
no
Settable via web server the first 3 bytes:
xxx.xxx.xxx.yyy
yes, all bytes
Settable via BootP/DHCP
server, DTM
no
To Next Page
Loading...
Need help?
General
