1
2018/02
TBIP-Lā¦-FDIO1-2IOL
Part 1 ā TBIP-Lā¦-FDIO1-2IOLā Safe I/O channels
Table of Contents
1 About this user manual 5
1.1 Documentation concept 5
1.2 Target Groups of these Operating Instructions 5
1.3 Additional Documents 6
1.4 Manufacturer and Service 7
2 For Your Safety 9
2.1 Intended Use 9
2.2 Foreseeable Misuse 9
2.3 General Safety Instructions 9
2.4 Residual Risks (EN ISO/ISO 12100-1) 10
2.5 Proper and Safe Operation 10
2.6 Warranty and Liability 10
2.7 Legal Requirements 11
2.7.1 National and International Directives and Standards 11
2.7.2 Cited Standards 11
3 Product description 13
3.1 Device Overview 13
3.2 Device structure 14
3.3 Block diagram 15
3.4 Technical Data 16
3.4.1 Safety Characteristic Data 16
3.4.2 General technical data 16
3.4.3 Technical data ā safety inputs 18
3.4.4 Technical data ā safety outputs 19
3.4.5 Derating curves 19
3.5 Safe I/O channels 20
3.5.1 Safe Status 20
3.5.2 Fatal Error 20
3.5.3 Safety inputs (FDI) 21
3.5.4 Safety outputs (FDO) 22
3.6 Universal Standard I/Os 23
3.7 IO-Link Master Channels 23
3.8 Configuration Memory 23
3.8.1 Storing a Configuration 23
3.8.2 Loading a Configuration from the Memory Chip 24
3.8.3 Reset the Device to Factory Settings (incl. Deleting the Memory Chip) 24
To Next Page
Loading...
Need help?
General
