25
2018/02
TBIP-L…-FDIO1-2IOL- Safe I/O channels
3.8.4 Deleting the Memory Chip
The content of the memory chip can either be deleted by using the rotary coding switches or via the
Turck Safety Configurator.
Deleting the Configuration via Rotary Switch Setting (901)
Plug the memory chip into device
Set the rotary coding switches to 90
1 (Erase Memory)
Execute a power cycle at the device
The content on the memory chip is deleted.
The procedure completed as soon as the ERR LED stops blinking.
Deleting the Configuration via Turck Safety Configurator
Select the function "Monitor operations Clear configuration" in the Turck Safety Configurator,
Fig. 5: Deleting the configuration via Turck Safety Configurator
The configuration on the memory chip is deleted.
The procedure completed as soon as the ERR LED stops blinking.
To Next Page
Loading...
Need help?
General
