5
2018/02
TBIP-L…-FDIO1-2IOL- Safe I/O channels
1 About this user manual
These operating instructions contain rules for the use of the devices in Safety Instrumented Systems
(SIS). The assessment of the safety related values is based on IEC 61508, ISO 13849-1 and IEC 62061.
The module serves for controlling signal devices as for example emergency stop buttons, position
switches or OSSDs which are used to ensure human, material or machine protection.
Read these instructions carefully before using the product. This is to avoid possible damage to per-
sons, property or the device.
1.1 Documentation concept
Part 1: TBIP-L…-FDIO1-2IOL – Safe I/O channels
This user manual describes all safety-related parts of TBIP-L…-FDIO1-2IOL.
The description of the unsafe channels of TBIP-L…-FDIO1-2IOL can be found in the following man-
uals:
Part 2: User manual – TBPTBIPN-L1-FDIO1-2IOL – Standard I/Os
Part 3: User manual – TBIP-L…-FDIO1-2IOL – Standards IO-Link channels
The following chapters describe:
the mounting
the electrical installation,
the configuration,
the troubleshooting including module exchange,
the dismounting and the disposal
1.2 Target Groups of these Operating Instructions
This operating instructions manual is directed to qualified personnel or technically trained person-
nel which works as planer, developer, design engineer, installer, electrical specialist, operator and
maintenance personnel.
These instructions are aimed at qualified personnel and must be carefully read by anyone mount-
ing, parameterizing, commissioning, operating, maintaining, unmounting or disposing of the
device.
To Next Page
Loading...
Need help?
General
