Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
44
7.1.3 Configuring in Turck Safety Configurator
See chapter 8, Configuring with Turck Safety Configurator and Rockwell Studio 5000 (page
45).
7.1.4 Operation of the Device at the PLC
Configure the device in the PLC
Device configuration in Rockwell Logix Designer, see chapter 8, Configuring with Turck Safety
Configurator and Rockwell Studio 5000 (page 45).
Load parameterization and configuration data via the PLC into the device.
Execute a functional test.
Check if the device works according to the configuration (see chapter 8, Configuring with
Turck Safety Configurator and Rockwell Studio 5000 (page 45)) and if all safety functions
react as experted.
To Next Page
Loading...
Need help?
General
