turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL User Manual

31
V01.0| 2017/04
TBPN-L1-FDIO1-2IOL - Standard IO-Link
4.1.3 Subindex 66: Set Default Parameterization
Structure of the reset command:
Byte 3 Byte 2 Byte 1 Byte 0
0xEF 0xBE 0xAD 0xDE
4.1.4 Subindex 67: Teach Mode
Structure of the Teach command:
Byte 0
0x00 Teaching all O-Link ports
0x01 Teaching of IO-Link port 1
0x02 Teaching of IO-Link port 2
0x03 to 0xFF reserved
Entity_
Port
IO-Link
subindex
Read
Write
Length Description
0 66 w 4 byte Writing this object sets the IO-Link master
b
ack to factory settings. Any parameter set-
ting and configuration is overwritten. The data
storage buffer is deleted as well.
Entity_
Port
IO-Link
subindex
Read
Write
Length Description
0 67 w 1 byte The master reads all data (device-Id, vendor-
ID, serial
number, etc.) from the connected
device and saves them. All all previously saved
device data are overwritten.

turck TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL Specifications

General

Brand	turck
Model	TBIP-L...-FDIO1-2IOL Series TBIP-L4-FDIO1-2IOL
Category	I/O Systems
Language	English