11
2018/02
TBIP-L…-FDIO1-2IOL- Safe I/O channels
2.7 Legal Requirements
Manufacturers and operators of machines and plants in which the module TBIP-L…-FDIO1-2IOL is
used are responsible for observing all relevant directives and standards.
2.7.1 National and International Directives and Standards
Machine directive 2006/42/EG
EMC directive 2004/108/EG
Work equipment directive 89/655/EWG
Accident prevention regulations/safety rules
Further Relevant Safety Regulations
Manufacturers and operators of machines and plants in which the module TBIP-L…-FDIO1-2IOL is
used are responsible for coordinating all relevant safety regulations and rules with the competent
authority and for observing all relevant safety regulations This all happens at the own responsibility
of the manufacturer and operators mentioned above.
2.7.2 Cited Standards
Standard Title
DIN EN ISO 13849-1:2008 Safety-related parts of control systems
DIN EN 62061:2005 + A1:2013
IEC 62061:2005
Safety of machinery - Functional safety of safety-related electrical, elec-
tronic and programmable electronic control systems
DIN EN 61508:2011
IEC 61508:2010
Functional safety of electrical/electronic/programmable electronic
safety-related systems
DIN EN 61131-2:2008
IEC 61131-2:2007
Programmable controllers
EN ISO/ISO 12100 Safety of machinery - General principles for design - Risk assessment and
risk reduction
To Next Page
Loading...
Need help?
General
