105
2018/02
TBPN-L1-FDIO1-2IOL- Safe I/O
11 Maintenance, repair, decommissioning and disposal
11.1 Maintenance
The TBIP-L…-FDIO1-2IOL is maintenance-free for the duration of use of 20 years.
Used cables as well as connected sensors and actuators have to be tested according to vendor spec-
ifications during the TBIP-L…-FDIO1-2IOL’s duration of use.
11.2 Repair
It is not possible to repair the TBIP-L…-FDIO1-2IOL.
In the event of an error, send the device back to Turck.
11.3 Decommissioning
The machine manufacturer is responsible for decommissioning the device.
When decommissioning a device ensure that the TBIP-L…-FDIO1-2IOL is reused as intended.
Please observe the storage and transport requirements according chapter 3.4.2, General techni-
cal data (page 16).
11.4 Disposal
Defective or faulty devices must not, in any event, be put back into circulation.
Send them back to Turck for testing and disposal.
To Next Page
Loading...
