Configuring a Controller
5–28 iSTAR eX Installation and Configuration Guide
Table 5.9: Advanced Tab
Section Description
Web Diagnostics
a
a. This feature applies only to iSTAR controllers running firmware version 4.0.0
or greater.
Select the Enabled option to allow viewing of Web
Diagnostic pages for the selected controller.
Clear the Enabled option to prevent viewing of Web
Diagnostic pages for the selected controller.
See Chapter 6, “iSTAR Web Page Diagnostic Utility”,” for
more information on Web Diagnostics.
SNMP
a
Select the Enabled option to enable SNMP. You can then
define security levels for up to two community names,
Clear the Enabled option to disable SNMP.
To Next Page
Loading...
