Chapter 5: Software 00.053.204, Revision A SonixTouch Q+ Service Manual
5-2
5.1.2 Software Update via a Downloaded File
If the system is not connected to the Internet, but a computer with Internet access is available, download the update
from the Ultrasonix website, ensuring that it’s copied to the root
of a USB device (memory stick, external hard drive,
etc.).
Equipment/Tools Required:
• USB media (memory stick, external hard drive, etc.).
To Update from a USB Device:
1. Download the relevant update and copy it to the root of a USB device (memory stick, external hard drive, etc.).
2. Connect the USB device to one of the system's external USB ports.
3. Tap the touch screen Menu button.
4. Select Administrator > Software Updates.
5. From the Update Location drop-down menu, select the relevant USB device.
6. Select the relevant file from the Available Updates drop-down menu.
7. Select Update.
8. When the installation is complete the system will automatically reboot and re-start the software.
Note: Ultrasonix service technicians, dealers and distributors with a Service Account login can access the latest
software here: http://www.analogicultrasound.com/ultrasonix/service. If you don’t have a Service Account login,
contact Ultrasonix Technical Support.
Note: If an error occurs during installation, contact Ultrasonix Technical Support for further instructions.
To Next Page
Loading...
