Ultrasonix SonixTouch Q+ - 7.1.2 Importing User Data (As Required)

SonixTouch Q+ Service Manual 00.053.204, Revision A Chapter 7: Field Service Components
7-3
7.1.2 Importing User Data (As Required)
Once the modulo has been installed, if required, import (restore) the previously-saved User Data from the
removable disk to this system.
The following options are available for import:
• Imaging Presets
• 3D/4D Presets
• DICOM Server Configuration
• Settings
• Measurement Order
• Obstetrical Tables
•Protocols
• General
• Preset Assignments
• Measurement Customization
•Worksheets
•Banners
• SonixHub Worksheets
• General Protocol.
Equipment/Tools Required:
• USB media (memory stick, external hard drive, etc.) containing previously exported data.
Note: If the system boots properly with all User Data intact, then it will not be necessary to import this data.
Note: Standard Worksheets are only available for the EMED, Anesthesia and Endocrinology
Protocols. SonixHub Worksheets are available for a wider variety of Protocols.