Operation overview
● Available operation modes
● Menu reference
● Keys and their functions
● Reading the display
Setting up the hardware
● Included with the scanner
● Connecting the antenna
● Connecting a GPS receiver
Programming your scanner
● Setting up systems
● Programming Number Tags
● Programming Quick Keys
● Programming Search Keys
● Programming locations
● Setting alerts
Operating your scanner
● Using Number Tags
● State-by-State Scanning
● BearTracker Warning System
● Using Quick Keys, Startup Keys, and Search Keys
● Using Tone Out mode
● Using Close Call mode
● Using Band Scope mode
● Using GPS mode
This page applies to the following scanner(s): BCT15X Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/BCT15X.html (2 of 2)5/26/2009 11:11:46 AM
To Next Page
Loading...
