Administration
A31003-S2030-M100-11-76A9, 01/2015
132 OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Feature Configuration
The Group pickup tone allowed parameter activates or deactivates the generation of an
acoustic signal for incoming pickup group calls. The default is "Yes". If this is activated, Group
pickup as ringer determines whether the current ring tone or an alert beep is used. If set to
"Yes", a pickup group call will be signaled by a short ring tone; the currently selected rigtone is
used. If set to "No", a pickup group call will be signaled by an alert tone. The default is "Yes".
Depending on the phone state and the setting for Group pickup as ringer, the group pickup
tone comes from the loudspeaker, the handset, or the headset. The volumes can be set in the
local user menu, under Audio > Volumes.
To Next Page
Loading...
Need help?
General