administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
237
Administration
Transferring Phone Software, Application, and Media Files
3.16.10 Dongle Key
The HPT dongle key is a special file that contains a secret hash number which is required to
connect the HPT tool to the phone. This testing tool is used exclusively by the service staff.
3.16.10.1 FTP/HTTPS Access Data
If the default FTP/HTTPS access settings (see Section 3.16.2, “Common FTP/HTTPS Set-
tings”) are to be used, Use default must be set to „Yes“, and only the Filename must be spec-
ified.
Data required (in any case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: „Yes“, „No“
Default: „No“
• Filename: Specifies the file name of the phone software.
• After submit: Specifies actions after submit button is pressed.
Value range: "do nothing", "start download".
Default: "do nothing".
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: „FTP“, „HTTPS“
Default: „FTP“
• Server address: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to „HTTPS“.
To Next Page
Loading...
Need help?
General