Unify OpenStage 15 Administration Manual

Administration
A31003-S2030-M100-11-76A9, 01/2015
156 OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Free Programmable Keys
3.8.9 Blind Call Transfer / Move Blind
A call is transferred without consultation, as soon as the phone goes on-hook or the target
phone goes off-hook.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > Blind transfer
3.8.10 Join Two CallsTransfer Call
Call transfer, applicable when there is one active call and one call on hold. The active call and
the held call are connected to each other, while the phone that has initiated the transfer is dis-
connected.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > JoinTransfer Call
>
This feature can be enabled or disabled under System > Features > Feature access
(see Section 3.6, “Feature Access”).
Key.label 3
Blind transfer
Blind transfer
Submit
Reset
Key.label 3
Join
Transfer Call
Submit
Reset

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg