Unify OpenStage 15 Administration Manual

inbetriebnahme.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
37
Startup
Quick Start
Setup using a DHCP server on Unix/Linux
The following snippet from a DHCP configuration file (usually dhcpd.conf) shows how to set up
a configuration using a vendor class and the "vendor-encapsulated-options" option.
class "OptiIpPhone" {
option vendor-encapsulated-options
# The vendor encapsulated options consist of hexadecimal values for
the option number (for instance, 01), the length of the value (for in-
stance, 07), and the value (for instance, 53:69:65:6D:65:6E:73). The
options can be written in separate lines; the last option must be fol-
lowed by a ’;’ instead of a ’:’.
# Tag/Option #1: Vendor must be "Siemens"
#1 7 S i e m e n s
01:07:53:69:65:6D:65:6E:73:
# Tag/Option #2: VLAN ID
# 2 4 0 0 0 10
02:04:00:00:00:0A;
# Tag/Option #3: DLS IP Address (here: sdlp://192.168.3.30:18443)
# 3 25s dlp: //1 92 .168.3 . (...etc.)
03:19:73:64:6C:70:3A:2F:2F:31:39:32:2E:31:36:38:2E:33:2E:33:30:
3A:31:38:34:34:33;
match if substring (option vendor-class-identifier, 0, 11) =
"OptiIpPhone";
}
2.3.8.2 Using Option #43 "Vendor Specific"
Alternatively, option #43 can be used for setting up the VLAN ID and DLS address. The follow-
ing tags are used:
• Tag 1: Vendor name
• Tag 2: VLAN ID
• Tag 3: DLS address
Optionally, the DLS address can be given in an alternative way:
• Tag 4: DLS hostname
The Vendor name tag is coded as follows (the first line indicates the ASCII values, the second
line contains the hexadecimal values):
Code Length Vendor name
1 7 Si emens
01 07 53 69 65 6D 65 6E 73

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English