Unify OpenStage 15 Administration Manual

administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
137
Administration
Feature Configuration
3.7.6 Callback URIs
The Callback option allows the user to request a callback on certain conditions. The callback
request is sent to the SIP server. The Code for callback busy requests a callback if the line is
busy, i. e. if there is a conversation on the remote phone. Code for callback no reply applies
when the call is not answered, i. e. if nobody lifts the handset or accepts the call in another way.
The Code for callback cancel all all deletes all the callback requests stored previously on the
telephone system/SIP server.
Data required
• Callback: FAC: Access code that si sent to the server for all kind of Callback .
• Code for callback cancel all / Callback: Cancel all: Access code for canceling all call-
back requests on the server.
Administration via WBM
System > Features > Addressing
Administration via Local Phone
>
The callback feature can be enabled or disabled under System > Features > Feature
access (see Section 3.6, “Feature Access”).
|
--- Admin
|
--- System
|
--- Features
|
--- Addressing
|--- Callback: FAC
|
--- Callback: Cancel all
Conference
Group pickup URI
Callback: FAC
BLF pickup code
*0
Addressing
MW server URI
192.168.1.2
Submit
Reset
Callback cancel all

Unify OpenStage 15 Specifications

General

Display	Yes
Display Lines	2
Keypad	Yes
Speakerphone	Yes
Volume Control	Yes
Wall Mountable	Yes
Headset Port	Yes
Power over Ethernet (PoE)	Yes
Ethernet Port	1
Protocols	SIP
Dimensions	200 x 200 x 90 mm
Weight	0.8 kg