Unify OpenStage 15 Administration Manual

referenz.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
375
Technical Reference
Troubleshooting: Error Codes
4.3 Troubleshooting: Error Codes
For a set of error cases, specific error codes are defined. These error codes are shown in
brackets on the display, following a general error note. Example: „No Telephony possible
(LP1)“.
Problem Description Error code
Network Problem No network connection LI1
Not Initialised Waiting for data I1
Unable to use LAN 802.1x error LX1
Unable to use LAN Physical connection missing LP1
Unable to Register Server timeout RT2
Unable to Register Server failed RF2
Unable to Register Authentication failed RA2
Unable to Register No number configured RN2
Unable to Register No server configured RS2
Unable to Register No registrar configured RG2
Unable to Register No DNS domain configured RD2
Unable to Register Rejected by server RR2
Unable to Register No phone IP address set RI2
Survivability Backup route active B8
Survivability Backup not configured RS8
Survivability Backup timeout RT8
Survivability Backup authentication failed RA8
Cloud-Deployment
abandoned by user
Cloud-Deployment abandoned by user
Occurs when the pin prompt is dismissed
AU
Cloud-Deployment:
unable to get the
address for the SEN
Redirect server
Cloud-Deployment: unable to get the address
for the SEN Redirect server. DNS lookup
failed
RS
Unable to establish
contact with SEN
Redirect server - no
reply
Cloud-Deployment: unable to establish con-
tact with SEN Redirect server - no reply
RN
Tabelle 4-1 Troubleshooting Error Codes

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English