administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
93
Administration
Security
3.4.6 Certificate Policy
3.4.6.1 Online Certificate Check
The Online Certificate Status Protocol (OCSP) is used to check if a certificate to be used has
been revoked. This protocol is used to query an Online Certificate Status Responder (OCSR)
at the point when the certificate is being validated. The address of an OCSR can be configured
on the phone and can also be obtained from the certificate to be checked (which will have the
priority).
When OCSP check is activated, the configured OCSR is requested to check if the certificate
has been revoked.
OCSR 1 address specifies the IP address (or FQDN) of a primary OCSP responder.
OCSR 2 address specifies the IP address (or FQDN) of a secondary OCSP responder.
Administration via WBM
Security and Policies > Certificates > Generic
To Next Page
Loading...
Need help?
General