Unify OpenStage 15

administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
59
Administration
LAN Settings
3.2.3 LLDP-MED Operation
OpenStage phones support LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Dis-
covery) for auto-configuration and network management. The auto-configurable parameters
are VLAN ID (see Section 3.2.2, “VLAN”) and Quality of Service parameters (see Section 3.3.1,
“Quality of Service (QoS)”).
The data sent by a network device is stored in neighboring network devices in MIB (Manage-
ment Information Base) format. In order to keep this information up-to-date, a specific TTL
(Time To Live) is specified in LLDP. This value tells a device how long the received information
is valid. For OpenStage phones, the value range is 40, 60, 80, 100, 110, 120, 140, 180, 240,
320, 400.
An example for LLDP-MED operation an OpenStage phones can be found in Section 5.4, “An
LLDP-Med Example”.
Administration via WBM
Network > LLDP-MED operation
Administration via Local Phone
|
--- Admin
|
--- Network
|
--- LLDP-MED operation
|
--- Extended power display only
|
--- Network policy (voice) display only
|
--- LLDP-MED cap’s display only
|
--- MAC-Phy config display only
|
--- System Cap’s display only
|
--- TTL
|
--- TTL
LLDP-MED operation
Submit
Reset
Time to live (seconds)
120