Unify OpenStage 15 Administration Manual

Administration
A31003-S2030-M100-11-76A9, 01/2015
86 OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Security
3.4.2 Access Control
The CCE access parameter controls TCP and UDP access for the CCE (CommsChannel Ex-
tender). This affects the operation of the OpenStage Manager, local CTI access, and HPT ac-
cess. When "Disable" is selected, both TCP and UDP are is disabled. With "Enable", there are
no restrictions.
With Factory reset claw, the ’hooded claw’ keypad mechanism to initiate a factory reset with-
out requiring an authenticated access can be enabled or disabled.
The Serial port parameter controls access to the serial port. When set to "No password", a ter-
minal connected to the port can interact with the phone’s operating system without restrictions.
When "Passwd reqd" is selected, the serial port requires a password for access (root user is
not available). When "Unavailable" is chosen, the serial port is not accessible.
As a prerequisite, the root user needs to create a user and to define a password via Serial Ac-
cess, so that access can be granted when the Password required prompt is issued.
Administration via WBM
System > Security > Access control
Access control
Submit
Reset
Factory reset claw
CCE access
No Password
Serial port
Enable
;

Unify OpenStage 15 Specifications

General

Brand	Unify
Model	OpenStage 15
Category	Telephone
Language	English