administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
153
Administration
Free Programmable Keys
3.8.5 Call Forwarding by Call Type
This feature enhances the Call Forwarding (Standard) operation (see Section 3.8.4, “Call For-
warding (Standard)”) by adding support for additional Call Forwarding settings explicitly for Ex-
ternal and Internal calls, as well as the existing capability to forward any call, using functional
menus that extend the existing Call Forwarding UI.
The label displayed to the left of the key is defined in Key label <key number>. It is possible
to have an extra key defined for each Call Forwarding Call Type.
Data required
• Forwarding type: Determines forwarding behaviour.
Value range: „CF Unconditional any“,
„CF no reply - any“,
„CF busy - any“,
„CF unconditional - ext.“,
„CF unconditional - int.“,
„CF no reply - ext.“,
„CF no reply - int.“,
„CF busy - ext.“,
„CF busy - int“
Default: „CF Unconditional any“
• Destination: Destination number of call forwarding.
Administration via WBM
System > Features > Program keys > Forwarding
>
To use extended call forwarding, Server features and Allow uaCSTA must be swit-
ched on (see Section 3.7.10, “Server Based Features”).
>
This feature can be enabled or disabled under System > Features > Feature access
> Ext/int forwarding (see Section 3.6, “Feature Access”).
To Next Page
Loading...
Need help?
General