administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
173
Administration
Multiline Appearance/Keyset
tion must be set to "hot line". If set to "Warm phone", the specified destination number is dialed
after a delay which is defined in Initial digit timer (seconds) (for details, see Section 3.7.3,
“Initial Digit Timer”). During the delay period, it is possible for the user to dial a different number
which will be used instead of the hot/warm line destination. In addition, the user will be provided
with a dial tone during the delay period. With the setting "No action", the line key will not have
hot line or warm line functionality.
System > Features > Program keys
Data required
• Key label <n>: Set the label of the line key with the key number <n>.
Default: "Line"
• Primary line: Determines whether the line is the primary line.
Value range: "Yes", "No"
Default: "No"
• Ring on/off: Determines whether the line rings on an incoming call.
Value range: "On", "Off"
Default: "On"
• Ring delay (seconds): Time interval in seconds after which the line starts ringing on an
incoming call.
Default: 0
• Selection order: Priority assigned to the line for the selection of an outgoing line.
Default: 0
• Address: Address/phone number which has a corresponding entry on the SIP server/
registrar.
• Realm: Domain wherein user id and password are valid.
• User Identifier: User name for authentication with the SIP server.
• Password: Password for authentication with the SIP server.
• Shared type: Determines whether the line is a shared line (shared by multiple endpoints)
or a private line (only available for this endpoint).
Value range: "shared", "private", "unknown".
Default: "shared"
• Allow in Overview: Determines whether the line appears in the phone’s line overview.
Value range: "Yes", "No"
Default: "Yes"
• Hot warm action : Determines if the line is a regular line, a hot line, or a warm line.
Value range: "No action", "hot line", "warm line"
• Hot warm destination : The destination to be dialed from the hot/warm line when the user
goes off-hook.
To Next Page
Loading...
Need help?
General
