Unify OpenStage 15

administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
205
Administration
Distinctive RingingRinger Setting
The OSCAR client specification defines the following abstract names for use between SEN
equipmentAbstract names used for Special Ringers:
•"Bellcore-dr1" - normal (internal) alerting or ring-back;
•"Bellcore-dr2" - external alerting or ring-back;
•"Bellcore-dr3" - recall alerting or ring-back (e.g., following transfer).
•"alert-internal" - normal (internal) alerting or ring-back;
•"alert-external" - external alerting alerting or ring-back;
•"alert-recall" - recall alerting or ring-back (e.g., following transfer)
•"alert-emergency" - emergency alerting or ring-back.
•"Line-<DN of Line>-Reserved" - distinctive alerting for a line with number <DN of Line>
Once made available (by the administrator) to the user, the Special Ringers for the call types
listed can be selected and configured via the User menu as shown in Section 3.14.3, “Special
Ringers”.
Administration via WBM
Admin > Ringer setting > Distinctive
>
To make the special ringers available and configurable to the user, the administrator
needs to map the call types to specific ringers via the Ringer setting mapping table
in Admin > Ringer setting > Distinctive. Each call type can be mapped to a spe-
cific Ringer sound, Pattern Melody, and Pattern sequence.