Administration
A31003-S2030-M100-11-76A9, 01/2015
208 OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
Distinctive RingingRinger Setting
• Special3
Administration via Local Phone
For each call type, the following parameters can be configured:
The Ringer sound parameter determines whether a pattern, i. e. melody, or a specific sound
file shall be used as ringer.
Pattern melody selects the melody pattern that will be used if Ringer sound is set to "Pattern".
Pattern sequence determines the length for the melody pattern, and the interval between the
repetitions of the pattern. There are 3 variants:
• "1": 1 sec ON, 4 sec OFF
• "2": 1 sec ON, 2 sec OFF
• "3": 0.7 sec ON, 0.7 sec OFF, 0.7 sec ON, 3 sec OFF
|
--- User
|
--- Audio
|
--- <Special Ringers>
|--- Internal
|--- External
|--- Recall
|--- Emergency
|--- Special 1
|--- Special 2
|
--- Special 3
This page allows you to change the ringer played for a limited range
of special incoming calls where the type of call has been signalled to
the phone.
Internal
Extermal
Recall
Emergency
Special 1
Special 2
Special 3
Submit
Reset
Call type
Ringer
sound
Pattern
melody
Pattern sequence
Ringer4.mp3
Ringer2.mp3
Ringer3.mp3
Ringer5.mp3
1.0 sec. ON, 2.0 sec. OFF
2
2
2
2
Special ringers
1.0 sec. ON, 2.0 sec. OFF
1.0 sec. ON, 2.0 sec. OFF
1.0 sec. ON, 2.0 sec. OFF
Ringer1.mp3
Ringer1.mp3
Ringer1.mp3
1
1
1
1.0 sec. ON, 4.0 sec. OFF
1.0 sec. ON, 4.0 sec. OFF
1.0 sec. ON, 4.0 sec. OFF
To Next Page
Loading...
Need help?
General
