administration.fm
A31003-S2030-M100-11-76A9, 01/2015
OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
249
Administration
Applications
• Application name: Used internally to identify the XML application running on the phone.
Value specifications:
• It must be unique on the phone.
• It cannot contain non-alphanumeric characters, spaces for instance.
• The first character must be a letter.
• It must not be empty.
• Its length must not exceed 20 characters.
• Protocol: Communication protocol for the data exchange with the server.
Value range: "HTTP", "HTTPS"
Default: "HTTPS"
• HTTP Server address: IP address or domain/host name of the server that provides the
application or the XML document.
Examples: 192.168.1.133, backoffice.intranet
• Server port number: Number of the port that the server uses to provide the application or
XML document.
Examples: 80 (Apache default port), 8080 (Tomcat default port).
• Program name: Relative path to the servlet or to the first XML page of the application on
the server. For instance, if an XML document is saved in:
C:\Program Files\Apache Group\Apache\htdocs\ipp\ippTest.xml
the entry is:
ipp/ippTest.xml
The program name cannot be longer than 100 characters.
• Use proxy: Enables or disables an HTTP/HTTPS proxy for communication with the server.
Value range: "Yes", "No"
Default: "No"
• XML trace enabled: Enables or disables the debugging of the XML application.
Value range: "Yes", "No"
Default: "No"
• Debug program name: The relative path to a special servlet that receives the debug in-
formation.
Administration via WBM (V2R1 onwards)
A fixed function key can be defined as a start key for an XML application, in addition to the pre-
viously available start methods. Since the parameters are the same for those types of applica-
tion, only the screenshot for a regular XML application is shown underneath.
Applications > XML Applications > Add application
Applications > XML Applications > Add messages application
Applications > XML Applications > Add phonebook application