Unify OpenStage 15

Administration
A31003-S2030-M100-11-76A9, 01/2015
80 OpenStage SIP V3R3 for OpenScape Voice, Administration Manual
administration.fm
IP Network Parameters
• Trap community: SNMP community string for the SNMP manager receiving TRAP mes-
sages.
Default: "snmp"
• Queries allowed: Allows or disallows queries by the SNMP manager.
• Query password: Password for the execution of a query by the SNMP manager.
• Diagnostic sending enabled: Enables or disables the sending of diagnostic data to the
SNMP manager.
Value range: "Yes", "No"
Default: "No"
• Diagnostic destination: IP address or hostname of the SNMP manager receiving diag-
nostic data.
• Diagnostic destination port: Port on which the SNMP manager is receiving diagnostic
data.
• Diagnostic community: SNMP community string for the SNMP manager receiving diag-
nostic data.
• Diagnostic to generic destination / Diagnostic to generic device: Enables or disables
the sending of diagnostic data to a generic destination.
Value range: "Yes", "No"
Default: "No"
• QoS traps to QCU: Enables or disables the sending of TRAP messages to the QCU serv-
er.
Value range: "Yes", "No"
Default: "No"
• QCU address: IP address or hostname of the QCU server.
• QCU port: Port on which the QCU server is listening for messages.
Default: 12010.
• QCU community: QCU community string.
Default: "QOSCD".
• QoS to generic destination: Enables or disables the sending of QoS traps to a generic
destination.
Value range: "Yes", "No"
Default: "No"