Vaisala AWS310-SITE - Opening Service Connection to Sensor; Figure 10 QML Data Logger Without Cover

3. Remove the cover of the QML data logger and check the CPU board and the other
components.
Figure 10 QML Data Logger without Cover
1 Pressure sensor connector
2 Communication module slots MOD1 and MOD2
3 SPI connector for QMD202 local display
4 Status LED (green)
5 Lithium battery for real-time clock (3 V 35 mAh CR1220)
6 Reset button
7 CompactFlash (CF) card slot
6.5.3 Opening Service Connection to Sensor
To control a serial sensor directly, you can access the sensor command interface through the
QML data logger.
Chapter 6 – Troubleshooting
121