5.5 Enclosure Maintenance
The enclosure requires only a minimal amount of maintenance. At least once a year, check
that the internal wiring is in order and that all the screws on the mounting clamps are firmly
tightened. Also check that the door gasket is undamaged.
After a heavy storm, open the enclosure door and check for any water leakage or other
damage.
To clean the enclosure:
• Check and clean the connectors and the inside of the enclosure of, for example, spider
webs and other dirt.
• Check that the
flanges at the bottom of the enclosure are intact.
• Check that the door is firmly closed.
• Check and clean the static pressure head.
5.6 Inside Enclosure Maintenance
This section contains information for the basic maintenance of the components inside
enclosure BOX652.
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
86
To Next Page
Loading...
