The system does not send the TABLE report automatically. You can poll the report with the
TABLE command.
The TABLE report contains the following information:
• Station name
• The time when the report was generated, in the format <YYMMDD> <HHMMSS>, in UTC
time
• A list of observations with the unit, instant value, and status of the sensor that produces
the observation
Example of TABLE Report
Station name : AWS310-SITE
Date : 170903 111938
Uptime (h): 3
Internal temperature (C): 28.7
DC supply voltage (V): 12.0
Battery voltage (V): 12.280
Configuration : v1.0
Software : 8.04d
Hardware :QML201C-003
BatteryLow : 0
DoorStatus : 1
Instant Status
Wind direction (deg): 358 0
Wind speed (m/s): 12.0 0
Temperature (C): 15.4 0
Relative humidity (%): 55 0
Air pressure (hPa): 1000.7 0
Precipitation amount (mm): 1.4 0
Solar radiation (W/m2): 0 0
Visibility (m): 1108 0
Present weather : 52 0
Background luminance (cd/m2): //////// 0
Soil temperature 1 (C): 38.8 0
Soil temperature 2 (C): 12.9 0
Runway temperature (C): 25.8 0
Total flashes : 0 0
Wind sensors WS (m/s) WD (deg) Status
WMT700_1: 16.0 40 0
WMT700_2: ////// ///// //////
WAC155_1: ////// ///// //////
WAC155_2: 5.5 55 0
Clouds Height Status
Cloud base 1 (m): 209 0
Cloud base 2 (m): 322
Cloud base 3 (m): 479
Chapter 4 – AWS Client Usage
77
To Next Page
Loading...
