3. In Serial Port, select the COM port used for the service connection.
4. To save the changes, select Save.
5. To close the window, select Close.
4.4
Station Settings
The weather station is pre-configured with the ordered features during manufacturing.
However, you must
configure certain parameters, such as site information and messaging
settings. You can also add features later by installing additional preconfigured sensors and
changing the appropriate configuration parameters accordingly.
Before you make any changes to an existing system, download the current
setup file and back up the station parameters in case something goes wrong.
CAUTION!
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
32
To Next Page
Loading...
