Vaisala AWS310-SITE - LLWAS Report; Table 14 LLWAS Report, Wind Section; Table 15 LLWAS Report, Status Section

4.11.20 LLWAS Report
The LLWAS report gives dierent data about wind speed and wind direction.
LLWAS Report Format
$PidWV,xxx,R,yy.y,M,z*12<CR><LF><SOH>STA<STX> xx.x y zz.z a<ETX><CR><LF>
Table 14 LLWAS Report, Wind Section
Name Description
$PidMWV
The message header, where where id is the station ID.
xxx,R,yy.y,M,z
Message data:
• xxx = Wind direction (deg), 3‑second weighted average
• R = Relative direction
• yy.y = Wind speed (m/s), 3‑second weighted average
• M = Speed unit
• z = Measurement status, where A = valid and V = invalid
*12
Message checksum:
• * = Checksum indicator
• 12 = Checksum<8bit XOR %02d>
• Checksum span = Between $ and *, with them being excluded
<CR><LF>
Message trailer
Table 15 LLWAS Report, Status Section
Name Description
<SOH>STid<STX>
The message header, where id is the station ID.
xx.x y zz.z a
Message data:
• xx.x = External power voltage (V), instant value
• y = Low battery alarm
• zz.z = Data logger internal temperature (°C), instant value
• a = Door closed (0) / open (1)
<ETX><CR><LF>
Message trailer
LLWAS Report Characteristics
The system does not send the LLWAS report automatically.
Property
Value
Polling command
WIND<CR>
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
78