Appendix A. Command
Reference
Table 38 Help Text Syntax
Generic Representation Example
Type the command and the
parameter name. Parameters
shown in [ ] can be omitted.
warnings [clear] To see the warnings, type:
warnings
To remove warnings, type:
warnings clear
Replace the parameter symbols
with values. Parameters shown in
[ ] can be omitted.
time [HH MM SS YY MM DD] To see current time, type:
time
To set a new time, type:
time 15 45 00
To set a new time and date, type:
time 15 45 00 15 06 18
Replace the parameter symbols
with values. Parameters shown in
< > cannot be omitted.
loggo <group ID> –
To issue a command to the QML data logger, type the command and press ENTER. Use a
space between the command name and the subsequent parameters.
Table 39 Shortcut Keys Used with Commands
Key Usage
BACKSPACE Delete the last typed character.
CTRL+C Abort the file commands (dir, del, copy, move, verify).
CTRL+P, CTRL+N Scroll through the list of previously typed commands:
• P: previous
• N: next
CTRL+P, ENTER Repeat the previous command.
Table 40 Commands
Command Syntax Description
altitude [meters] altitude shows the current station altitude in meters from sea level.
altitude meters changes the setting.
Appendix A – Command Reference
139
To Next Page
Loading...
