2. In the Common Parameters window, set the following:
Station name
Define a name for the station. Do not use spaces or special characters in the
station name.
Altitude (m)
Type the weather station altitude from the mean sea level in meters. This setting
is needed only if your weather station measures barometric pressure.
Pressure Sensor Level
Type the height of the pressure sensor in meters from the ground. This is the
distance between the bottom of the enclosure and the ground. This setting is
needed only if your weather station measures barometric pressure.
Battery capacity (Ah)
Not used.
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
34
To Next Page
Loading...
