Getting Started
DME Admin Guide 39
Network
Monitoring
Tasks
Review Network Settings This task will show various Linux commands and result details of
your network settings.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
Press Enter to continue.
Advanced Network
Health
This task will show various Linux commands and result details of
your network settings. Utilizing ifstat, this task will show
snapshots and a repeating display of RX/TX Pkts statistics across
interfaces. This task also provides the measures using netstat.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
Press Enter to continue.
TCP Network Health This task will show various Linux commands and result details of
your network settings. Specifically, netstat is used to review active
TCP connections with their state, and metrics per protocol.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
Press Enter to continue.
UDP Network Health This task will show various Linux commands and result details of
your network settings. Specifically, netstat is used to review active
UDP connections with their state, and metrics per protocol.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
Press Enter to continue.
Ping Test This task will allow entry of a Hostname or IP address to perform
a ping test. Five tests will be performed and displayed.
This is a useful feature to test your connection to your Rev
instance (default address for test) or other online Hostnames.
Traceroute Test Like the ping test, this task will allow entry of a Hostname or IP
address to perform a traceroute. Each line will be displayed with a
max of 30 hops.
This is a useful feature to test and view the path to reach your Rev
instance (default address for test) or other online Hostnames.
Speed Test This item will run an Internet speed test utilizing speedtest.net. In
order to run this test, the DME will need Internet access. It will
reach out and pull down a list of available servers, and connect to
a close server to retrieve a sample dataset. Nothing will be stored
on your DME.
This is only a snapshot representing conditions during the test.
Group Administration Task Description
To Next Page
Loading...
General