Videojet DataFlex 6530 Service Manual - Rev AA 1-3
Introduction
1.4 Content Presentation
This Service Manual contains different types of information like safety guidelines, additional
notes, user interface (UI) terminology and so on. To help you identify the different types of
information, different writing styles are used in this manual.
1.4.1 Positional References
Positions and directions like left, right, front, rear, to the right and to the left are with respect to
the CLARiTY display when you see it from the front.
1.4.2 Units of Measurement
This manual uses metric units of measurement. The equivalent English measures are included in
parenthesis. For example, 240 mm (9.44 inches).
1.4.3 Safety Information
Specific safety information is listed throughout this manual in the form of Warning and Caution
statements. Pay close attention to these statements as they contain important information that
help in avoiding potential hazards to yourself or to the equipment.
1.4.3.1 Warning
• The warning statements indicate hazards or unsafe practices that can cause severe
personal injury or death.
• They have a triangular symbol with an exclamation mark to the immediate left of the
text.
• They are always preceded by the word “Warning”.
• They are always found before the step or information referring to the hazard.
For example:
34 Bulgarian *
36 Chinese (Traditional) *
WARNING
PERSONAL INJURY.
All electrical wiring and connections must comply with applicable local codes. Consult the
appropriate regulatory agency for further information.
Code Language Availability (see note)
Table 1-1: List of Language Codes (Continued)
To Next Page
Loading...
