5-12 Videojet DataFlex 6530 Service Manual - Rev AA
CLARiTY Operating System
5.3.1.4 Using the Options Screen
There are no options available at this time, it may be introduced in the next versions of the
CLARiTY.
Recalibrate Touch Screen Allows the user to recalibrate the
touchscreen, if touching the screen
does not accurately locate the correct
button or Icon. The printer requests
the user to touch several crosses which
are displayed on the screen, one after
the other. The screen is recalibrated
when the automated process is
complete.
Note: If the calibration of the machine has
too many errors and does not allow a user
to navigate to this screen via the control
panel, the same functionality can be
triggered from within CLARiTY
Configuration manager.
Set Screen Orientation Rotates the entire display through 180
degrees in the event that the control
panel is installed in an inverted
orientation.
Communications The following options are available:
• Manufacturer’s Password is
required for access - Resets all
serial communication reports in
the event that their setup has
become corrupted.
• Remote Service - Connects to the
Videojet Remote Service Portal.
Option Description
Table 5-6: Control Screen Description (Continued)
To Next Page
Loading...
