Videojet DataFlex 6530 Service Manual - Rev AA 1-1
Section 1 Introduction
This chapter contains the following topics:
• Equipment Description
• About this Manual
• Related Publications
• Content Presentation
• Abbreviations and Acronyms
• Chapters in the Manual
1.1 Equipment Description
The main parts of the Videojet DataFlex 6530 printer are described as follows:
• Printer: Houses the printhead and ribbon. The data is transferred to the printhead
from the controller. The printhead prints onto the packaging film.
• CLARiTY HMI Display: Houses the power supply unit and touch screen. You can
access jobs, setup jobs, set the various print parameters using the touch screen.
1.2 About this Manual
This service manual includes information about installing, maintaining, troubleshooting, and
servicing the printer. It also contains sections about the theory of operation and component
identification.
This document is intended to be used only by trained service personnel. It is intended to be a
supplement to (and not a replacement for) formal training. Keep this manual in a safe location
where it can be easily accessed for reference.
Figure 1-1: Videojet DataFlex 6530 Printer and CLARiTY HMI Display
1. Interconnecting Cable
2. Printer
3. CLARiTY HMI Display and
Power Supply Unit (PSU)
To Next Page
Loading...