Videojet DataFlex 6530 Service Manual - Rev AA
Section 2 Safety
This section contains the following information:
• Introduction
• Equipment Safety Guidelines
• Electrical Safety Guidelines
• Installation of the Printer
• Print Ribbon Safety Guidelines
• Other Important Guidelines
2.1 Introduction
The policy of Videojet Technologies Inc. is to manufacture printing/coding systems and supplies
that meet high standards of performance and reliability. Therefore, we employ strict quality
control measures to eliminate the potential for defects and hazards in our products.
The intended use of this printer is to print information directly onto a product. Use of this
equipment for any other purpose may lead to serious personal injury.
The safety guidelines provided in this section are intended to educate the operator on all safety
issues so that the operator can operate the printer safely.
2.2 Equipment Safety Guidelines
This section contains important safety guidelines pertaining to the operation and handling of the
equipment.
WARNING
PERSONAL INJURY.
Read this section thoroughly before attempting to install, operate, service, or maintain this
product otherwise, it may cause serious injury.
WARNING
PERSONAL INJURY.
The equipment should be operated by an authorized personnel who can use the machine
independently and without causing damage to the equipment or a personal injury. The
operating personnel should be trained and informed regularly about safety and environmental
hazards.
WARNING
PERSONAL INJURY.
Only trained service or maintenance personnel should perform the installation procedures.
Qualified personnel who have successfully completed the training courses, have sufficient
experience with this printer, and are aware of the potential hazards to which they will be
exposed.
To Next Page
Loading...